Easy DIY Treadmill Maintenance Tips – Fix Your Treadmill at Home
So after much trepidation and thought, you finally decided to invest in a treadmill. Purchasing a treadmill is a hefty investment to maintain a good workout regime and build your stamina at home. As such, it pays to do the simple maintenance to keep it running well for years to come.
Google would show a variety of content and reviews of different repair products. But the right way to take care of your treadmill can be handled from the comfort of your home.
Are treadmills high maintenance?
It is extremely crucial to pay a close eye on the functioning of your treadmill. Monitoring its maintenance personally will help ensure one gets the most out of the machine for eons. This may seem intimidating at first as you don’t want to cause permanent or unnecessary damage to your expensive gym equipment, but if you pay attention to your treadmill with each use, you won’t make mistakes.
For further clarity, read this article thoroughly, and follow these easy and quick steps to the letter religiously. Once you start implementing these in your pre or post-workout routines, it will flow more naturally. The following tips and repairs will not only help in a smooth workout but will also reduce the probability of availing lost warranty. The information and content of this article provide a well-informed and researched guide for home treadmill maintenance.
Check for Signs of Friction
It goes without saying that one of the most elementary care for treadmill maintenance is a constant lookout for wear and tear. It is physics, it is inevitable, and hence, you should biweekly check for visible signs of friction. Now, this may seem very vague, but two components that should be your top-most priority are the treadmill walking belt and the deck for burnt-out signs.
You need to check if there is anything out of the ordinary, this includes but is not limited to the placing of the treadmill belt. Regular use of a treadmill and varying speeds might encourage the belt to stray away from its original position by increasing belt tension.
If that may be the case, you need to align it along the center, to the nearest centimeter, and use a ruler to check if it is straight. For what it may be worth a centered, aligned, and straight belt will not adhere to the side of the belt, scrapping vigorously with motion. This will reduce friction, and therefore, decrease the chance of your belt rendering useless.
An easy observance of the position of the belt, which you can cross-check from the company’s manual will save you a visit from the repair technician and only improve the quality of your workouts.
Other indications of possible signs of wear and tear would be a decrease in maximum speed powered by the motor. These lack of power surges may be confusing for regular use but they can also be fixed. Your first instinct would be to check the treadmill motor, by switching your machine off. But if you turn on the treadmill and the error persists, then it most probably caused by a misaligned belt. This builds up belt tension which can be avoided.
One that you can easily repair with a quick adjustment and change of the position of the belt can save you the process of getting a new one. It would be wise to refer to the user manual and bookmark the page of the original set-up of the treadmill so that you can correct any misplacement.
However, you should be keen to realize when your frayed and broken belt is long overdue for a replacement, cutting down the lifespan of your treadmill.
How do you fix a wobbly treadmill?
At the end of each month, you should note down the bolts and frame nuts that secure the treadmill in place. With each vibration, jog, run, and high speed, it is not only common but also understandable if those nuts and bolts of the deck loosen. But it is your job to tighten those to keep the console intact with the frame of your home treadmill and avoid involuntary belt slips.
Most websites indicate the right equipment or deliver the appropriately sized wrench along with the machine so you can screw those loose bolts in no time, preventing a major workout accident. If the website does not prove to be of much help, then read through the user manual which has a detailed list of all the tools and bolts that are used to secure the frame of the treadmill.
An article for treadmill care, repair, and maintenance can’t exist without the emphasis on lubricating oils and fluids. Skip the time-consuming Youtube tutorial festered with ads and follow the article in order to understand the right way to lubricate the belt of your treadmill.
Like all working machines and electrical motors, it is essential for the user to be regular with lubrication which will in effect decrease friction. The benefits of consistent oiling are too long to fit in this article, but the following paragraph will delve into the process and the dos and don’ts of it.
How do you lubricate a treadmill?
- First and foremost, you need to identify the parts that need such extensive lubrication. These obviously include the ones that you or other parts of your machine are most in contact with.
- Experts recommend a healthy amount of paraffin or silicone-based lubricant. A thick coverage of this solvent may be required on the bottom of the deck belt, where you could expect maximum friction.
- Avoid a novice mistake to apply the slippery coating on the walking belt, this would only cause you to slip or require you to scrub it off the belt which would cause more damage.
Moreover, most maintenance manuals claim that if you sniff or detect burning, it might not necessarily be an overworked motor. Most of the time a misalignment or crooked deck increases wear and hence, slightly burns off.
Avoid the hassle of the pungent smell of burnt rubber by frequently lubricating the drive belt. To properly apply a coating of the paraffin fluid, you might need to pull out some handy tools. This may be because you would be required to loosen the bolts that secure the belt in place to apply the lubricant.
But after the application, make a mental note to retighten all the screws as they were when the machine first came.
What is the best treadmill lubricant?
It is difficult to reign one lubricant as the best as each treadmill is different. The frequency of application and amount of the different lubricants depends on many factors. These can range from how many times the treadmill is used, to the viscosity of the lubricant, to the primary base ingredient of it.
An average of once in three months was deduced by technicians and manufacturers. There is a clear warning to keep your treadmill away from a WD-40 as the harsh chemicals of the lubricant are known to destroy the belt quickly.
Cleanse – Keep Your Treadmill Clean
With the pandemic there is a rise in general care for hygiene, it is now more important and can be achieved in different ways. You should wipe down your machine after every use.
An accumulation of sweat, bacteria, and hair can not only mess up the settings of your machine but can also decrease the quality of its functioning. This built-up moisture can prove to be detrimental for treadmills as it will promote rusting of its metal parts and will be a breeding ground for hazardous fungal and bacterial growth.
The easiest task and the bare minimum would require you to wipe your treadmill with a damp cloth but sometimes treadmills require more effort and love.
How do you clean a treadmill?
It would be wise to invest in and order one DIY home treadmill cleaning kit, to keep your machine safe to use. This kit can be used for multiple other reasons as well.
These kits not only cover essentials for the motor area but also keep the treadmill deck useable. Again, the need for elaborate cleaning and maintenance varies from machine to machine. If you are a regular user then you might need to clean and cleanse your treadmill about four times a week.
By purchasing a non-abrasive detergent and a cleanser, your treadmill can wipe off the residual sweat from the frame and console. However, keep your treadmill efficient and working by not spraying chemicals on the belt. To be gentler, use a nozzle to spray it on the cloth, and use the slightly drenched cloth over the machine to not ruin the settings.
For more accurate information according to your specific treadmill model, refer to the user manual. Most would also suggest in a motor cover to not specifically damage the treadmill or its purposes.
Use a treadmill mat
One tip which may not make sense at first and resemble more of the advice of an interior designer, but is crucial to reduce unnecessary treadmill repairs. Turn the mat to act as a barrier or protective belt between the machine and the surroundings encompassing the treadmill.
The frequent use of the treadmill creates repetitive vibrations that can leave scratches on the floor and damage expensive floorboards. Different reviews swear by this tip, as the floor mat helps secure the treadmill to one particular area by providing an anchor to the side of the belt. Moreover, it reduces the noise and machine sounds a common treadmill is expected to make.
The idea of a floor mat may seem futile. But it is one way to definitely try to stop the treadmill with dust particles, pet hair spam. When these things are considered, you may not even need replacement parts as frequently suggested by the manufacturer’s site.
Vacuuming a treadmill
A floor mat will make this considerably easier to perform. But this process can be optional if the warranty includes services of cleaning. If not, then check the manual or the site if the brand has discouraged you from doing so on your particular model.
The problem with not vacuuming a treadmill is the rusting of its motor with dust clusters and debris. To repair such a problem, it is helpful to vacuum the area surrounding your treadmill at least once a week. More so if your home is in a windy city.
The idea is to suck off dust balls, feathers, pollen, and all things that are invisible to the naked eye. These substances usually accommodate themselves on the treadmill belt because of the trainers that you use while operating the machine.
How can you make your treadmill last longer?
Maintenance manual, care guides, Google reviews, and the company sites propose vacuuming the inside of the machine annually. One should always turn the machine off, unplug it from the socket, and then proceed to remove the motor cover, to suck the dust from the motor area. This is a delicate area and thus, should be dealt with care.
A high-speed vacuum should not be used on electrical components as it would result in a problem. Be careful that the vacuum tips should not touch the components and should lightly move around them.
These tips will guarantee a clean and functioning treadmill. Moreover, external factors should also be kept at bay. Unregulated pet hair may cause a problem. While a floor mat under the treadmill is recommended, the onus falls on you to get rid of carpet fibers.
Contact with foreign debris can have disastrous effects on your motor and circuit boards, resulting in hefty repairs.
Why has my treadmill stopped working?
Safeguard Electrical Components
Because of frequent use of the machine, you’ll need to regularly keep a side-eye out for any electrical problems. The website content always directs the home user to turn off the machine if they detect a burning smell. It is important to unplug the machine as it can prevent outages and power surges, especially if the treadmill console has been burnt.
Before applying any creative idea to initiate repair of the brunt part, it is important to identify which side has been affected. The fire could be because of motor-related issues such as dust under a motor, an overworked treadmill motor, or a short-circuited motor because of plugging the machine in the incorrect socket.
It could also be attributed to a treadmill belt complication. The belt may be loose, the belt may be too tight, or a foreign object may have lodged itself under the belt. You should never ignore a burning smell, as it could escalate to a fire hazard.
You can also protect your treadmill’s electronic components by plugging it into a surge protector, keeping your treadmill safe during power surges and outages. Before purchasing an expensive surge protector, refer to the home manual to check which one is more compliant with your treadmill. Monitor the belt and the power cords regularly as well, observing for any damage or signs that they need to be replaced.
How to store Your Treadmill
The manual has many purposes, including providing the home treadmill user with an idea to store the treadmill correctly. Don’t ever deck your treadmills in places that are prone to get wet or may fasten fungal growth.
Treadmills need to be handled delicately and their use is most efficient under a certain temperature range to steer clear of fire hazards. The amount of times treadmills were discarded in gyms with direct sunlight or in garages with low temperatures is exponential.
Such extreme temperatures may affect the shape of the belt and the structure of the deck of the treadmill.
How to make treadmills last longer?
Maximize the use and efficiency of your treadmills at home by adhering to the content provided. If you are interested in making that expensive treadmill last longer, then you need to take care of it.
This page acts as a detailed guide to provide you with information on storing your treadmills safely, increasing the operation of the belt, and securing the deck. Non-operational or rusty treadmills do not necessarily indicate the search through many ads for belt or deck improvements.
Instead, this simple machine has a set of components that are simple to apprehend and thus, do not need you to reach out to the inbox of sketchy repairmen.